Bring one supply in and split it out to many loads. Choose by how much current comes in and how many wires go out. All figures below are WAGO's.
-
Many outputs from one module: WAGO 830-800 Power Distribution Modules (PDM). Single-potential modules take up to 65 A in, with 6 or 9 outputs (12 A or 10 A per output). Double-potential modules take 30 A in, with 8, 12, 16 or 24 outputs per potential (10 A per output). Versions with lever inputs are offered. Rated 250 VAC/VDC; outputs take 28–12 AWG.
-
Six outputs in a 9 mm block: TOPJOB® S 2006 distribution terminal blocks. One feed-in up to 8 AWG and six 14 AWG outputs, on DIN-35 rail.
-
Tap loads off a high-current block: 285 power taps. 285-1175 and 285-407 take 24–8 AWG at 57 A per termination. 285-427 and 285-447 take 24–10 AWG at 30 A per termination. All rated 600 V.
-
Main feed up to 350 kcmil: 285 POWER CAGE CLAMP® high-current terminal blocks. WAGO rates the 285 blocks in its Power Distribution Solutions brochure from 115 A (6–2 AWG) to 310 A (1/0 AWG–350 kcmil), approved per UL 1059 / CSA 22.2.
-
288 Series: the 288-837 potential distribution module.
Not sure which one fits? Call us at (973) 376-6315 with your current and output count, or search an exact part number.